Little help

[DEMMYM]

I know we have gone over this but my arms are to tired to search through threads.

Ive been out in the garage for the last 2 hrs taking the Kanji and Hayabusa emblem of the front fairing. Started with the hair dryer and got the top lifted off, My problem is the glue left behind, I am a true beleiver in Goo Gone but it aint working. Any suggestions on what else I can use without messing up the paint.

 

[twotonevert]

Try WD-40, vegetable oils works. Its how I took the glue of off Juli's fairings.

 

[AJAY]

Probably won't help you on a Sunday, but Sem Solve is my preferred chemical to clean stuff off of paint. This is a professional product used mostly to clean up overspray, but it's good for tar, adhesives, and stuff like that. Cheap too, at about $12 a quart, but you have to get it from a place that supplies the professional automotive painters.

Products: SE38374 - SEM SOLVE, QT

But since it will be Sunday when you read this, maybe WD-40 might work?

 

[DEMMYM]

Thanks James heading out to try it now

 

[twotonevert]

Get you a 100% cotton cloth, rub in small circles with either the oil or the WD. I will check on you later, our Realtor is on his way to the house.

 

[Hayabusa2005]

Sometimes you have to let the GooGone on for a while...

 

[DEMMYM]

Alrighty 3 hrs Goo Gone / WD-40 / Veg Oil. and its not budging

How long would you think I should leave the Goo Gone on there.

 

[DEMMYM]

Get you a 100% cotton cloth, rub in small circles with either the oil or the WD. I will check on you later, our Realtor is on his way to the house.

Showing the house ?

 

[fiend]

You might try rubbing alcohol.

 

[dadofthree]

Starting to sound like a sticky situation.

 

[DR1300R]

Try fingernail polish remover, on a small spot first of course.

 

[twotonevert]

Showing the house ?

It showed 3 times yesterday, on showing was a couple that had already looked at it earler this week.

 

[twotonevert]

Starting to sound like a sticky situation.

Your killin me.

 

[twotonevert]

Try fingernail polish remover, on a small spot first of course.

Never thought about that, will it harm the pain Doyle?

 

[phierce]

Low VOC parts cleaner. AutoZone
I used it to take the Ivan Stewart stickers off my Tundra
Worked well but test on the Busa paint first just in case.

 

[AJAY]

Try fingernail polish remover, on a small spot first of course.

Might work, except fingernail polish remover contains acetone which is bad for paint. That's why I recommended Sem Solve. You can probably find it locally tomorrow at an automotive paint supply house.

 

[DR1300R]

Never thought about that, will it harm the pain Doyle?

 

[DR1300R]

Might work, except fingernail polish remover contains acetone which is bad for paint. That's why I recommended Sem Solve. You can probably find it locally tomorrow at an automotive paint supply house.

Woops maybe you better not try it..

 

[O Holy P]

3M makes a pin stripe/adhesive removal wheel that you attach to a drill. That may help.

3M Pinstripe Removal Wheel - ZZ3000


P

 

[alglag412]

good luck let us know!