Minor Mods

[dwnhllthng]

Hey guys, I'm new to the Busa, though I have owned many sportbikes in my day and a few cruisers I finally felt I was ready for the Big boy. Anyways I have a few questions. I bought a used 2002 Blue/Black with 6,800 k on it. I really wish it had a grab bar on the back, can I put one on? How much would that cost? Also the guy before me put on some fake Carbon Mirrors and they are a little loose at the compression joint, is there a way of tightening that? Thanks guys, and I look forward to becoming one!!

 

[TurboSN95]

You should be able to find a stock grab bar and its 4 bolts that hold it on which go under the rear seat area.  There is a "hump mod" that you can do if you want the grab bar on at the same time as the stock "hump".  Just search for hump mod if you want to do that once you get the grab bar.

And congrats on the Busa!!!! Be safe!!!

 

[rybraun]

They all come with a grab bar but you have to remove it for the hump unless you do the hump mod.

 

[thepushercg]

on the compression joints take two small c clamps on each side and tighten down.
or a hammer and a punch walk the punch around the top ring.
if that fails then crazy glue, or you can find stock ones for around 40 bucks on here or ebay . same for the grab bar..also you could ask andyman66 or goldenchild on here i am sure they will have what you need