Muzzy fan blade ez or hard to install?

[DAHAPPY1]

After sitting in traffic watching the needle climb toward the red and looking at the shoulder wondering if there was cop waiting for me up ahead, I decided to go up the center… while doing it I figured I would try to correct the over heating problem this weekend.

Question the manual says I need to drain all antifreeze and the oil remove radiator and then fan.. Is there an easier way to install new fan blade? Also is there another type of coolant I can use besides Engine Ice that would help me with keeping this girl from getting so hot??

 

[MO-BUSA]

this should help ya thanks to gmbusa

waterwetter is another additive u can try

https://www.hayabusa.org/forum/maintenance-do-yourself/35113-muzzy-fan-install-pics.html?highlight=muzzy+fan+install

by the way its an easy install

 

[MO-BUSA]

there is also this one too if you want a second fan
https://www.hayabusa.org/forum/engine-performance-mods/71945-second-cooling-fan-busa.html?highlight=muzzy+fan+install

 

[Fredyp33]

I just did install a muzzy fan, and it's not too hard. Just somewhat annoying that you have to take off both fairings to get to all three screws that mount the fan cover. And you don't have to take off your radiator, just unscrew the mount and pull it out the side.

Oh, and because it's much lighter in weight than the stock fan, it spins much faster and therefore cools the radiator down quicker.

Hope this helps.

 

[VaBusa]

I managed to do that swap by myself, so yeah, it's easy

Good luck!