My Busa Christmas Garage Modification (pic Heavy)

[Rivercop UK]

Well, Spent a fortune on the run up to Xmas on bling and performance mods for the 'Busa .... In fact I spent about 5x more than on the missus ... But she won't mind as long as she doesn't find out !!

Right ... Ready to rock n roll:

Rear wheel off and a sprocket change:

ECU Editor - STP, TRE, Switch off o2 and PAIR and a general fiddle:

Drop the oil and coolant:

Radiator and OEM headers off:

Airbox off and BMC Filer fitted. Also removed huge Tracker unit found wedged inside - Also dropped in some Iridium sparkies while I was in there:

PAIR block off's fitted:

New exhaust back from welders ... Sliced myself up good and proper while wrapping it:

PCV fitted ... Pain in the butt to get to those secondary injector plugs .. Many swears were made:

All put back together:

PCV and Autotune all nicely tidied away:

The Autotune wideband sensor plugs are huge and really difficult to place. For once the bike fired up straight away without any problems. PCV and Autotune appear to be working, but as its -3 outside its not going for a run out yet. Still gotta put its fairings back, Airblade screen when it arrives, and overhaul the brakes. ROLL ON SPRING !!

 

[sixpack577]

You're bleeding...so it must be done right, lol.
lookin good

 

[Rivercop UK]

My hands are cut to bits ... Looks like I've been juggling kittens.

 

[c10]

Kool . Vance n Hines header ?

 

[Rivercop UK]

No .. Its a modified Black Widow De-Cat header.

 

[c10]

Ok just a fyi its a clone of the vance/ hines header . I like it . I was going to get a black widow till a great deal on a vance / hines knocked on my door .

 

[busafan08]

Looking good I be interested on the feedback on your mods when the weather gets better for you ha ha and especially the black widow exhaust

 

[Cantab]

By what your saying bout cramming stuff in (PC etc) sounds like Sixpacks trunk mod is next on the list while the bikes apart.

 

[Rivercop UK]

By what your saying bout cramming stuff in (PC etc) sounds like Sixpacks trunk mod is next on the list while the bikes apart.

Not quite .. I did the hump mod just to keep the tyre puncture stuff and some spare fuses etc in.

As for the exhaust, it's not as nice quality as the V&H setup, but at half the cost it's not so bad. It makes the bike a bit raspier but not obnoxiously so (Until 8500rpm and then it howls like a hell demon dog after its tail was stood on). I would get a video link put up but I kinda like my neighbours.