My setup...

[IRDEATH]

Purging my nitrous system...

 

[megawatt]

Nice,, can you talk a little about the mout you have there? Looks sharp.

 

[BusaWizard]

Looks like a nice set up.

 

[jeepinocala]

Hey are you puging it right into the intake tubes? I dont think it is a good idea to do that at idle?

 

[gap4652]

How are you getting good flow of nitrous out of your bottles mounted like that. It looks sweet but you may run into functionability issues without them tilted downward. But it does look great Props on the ergonomics.

 

[IRDEATH]

I bought the twin bottle setup from dynojet. I have a nitrous solinoed and a purge solinode, which are both activated indepentaly from each other. The nitrous solinoed activated by the horn button, runs inside my airbox. What is in the picture is the purge solinode activated with the high bean pass button. The purge solinode has two lines coming from it one in each ram air intake pointing outward. When i purge the system it sprayes out the ram air intakes like in the picture. When i use the horn button it activates the nitrous solinoed and sprays only in the airbox.

Yes the kit does look nice but i would not recommend it to anyone else as it didnt come with any bolts to mount the brackets for the nitrous tanks. I had emailed dynojet an told them how i planed to run the two purge lines out the air inake inlets and came up about 15 inches to short on hose, just a few little things.

 

[Commuta_Busa]

that line to the airbox looks kinda scary.

 

[jeepinocala]

It looks like it is kinked. Did you consider looking to see if the purge is going right in the air tubes?

 

[kingofdacoast]

I've installed those kind of bottle mounts before. They do look good but they aren't the best for using with a system. You'll end up with flow issues and they don't keep pressure consistant. They are more for a custom look than purpose.

Those kits are from dynoTUNE not dynojet.

 

[IRDEATH]

Whoops... Thanks for the correction!! Yes ,they are from dynotune! (what is printed on the solenoids) my mistake.
I was in a hurry i guess

 

[jeepinocala]

As asked before does the purge go right into the air intake tubes?

 

[IRDEATH]

For me this is mainly just for show, but it also bleeds air from the lines

 

[jeepinocala]

hey not to sound negative but isn't it a bad idea at idle to purge nos right into the motor????

 

[IRDEATH]

When it is purged it just sprays into the air, away from the bike. Just like in the pic. I have two seperate buttons, one for purge and one for nitrous; that gets sprayed into the airbox.

 

[Wild07]

It looks like everyone's concern is that with the proximity to the intake tubes, you'll be sucking some N2O into the intake at idle. Given that it looks like the purge lines are slash cut and with the pressure you should be putting out of them I wouldnt think it would be a problem, it is a very valid concern.

 

[frisbee]

Mines done the same way and has worked for years . Looks good the way you have the bottles !!

 

[jeepinocala]

Here are my thoughts lets say you are riding down a strip somewhere and you purge it as going forward that Nos some of it will go in the intake tube I dont know if it is enought to hurt the bike or not I purge mine out the back of the bike but my purge is not for looks just for confidence when I hit it. Looks good though.