Need a bit of help for me and another member on a cool design project

[rubbersidedown]

Hey doods... @BigBlu07 is fabricating some parts for the nose cone on Gen I & Gen II Busa's. I'll take my nose off if I have to but am hoping somebody out there has theirs off for whatever reason and can trace out a couple shapes for us. Mostly for BigBlu, he's the designer,fabricator...I'm along more in a janitorial/custodian type capacity.
Anyway...both Gen I and II air intake shapes is what we are after.
Check out progress here: click here
Cool idea,
Cool equipment,
Cool guy.
Help us out if ya can...thoughts,ideas...

Thanks bigtime,
Rubb.

 

[BigBlu07]

Any who help out will be thanked with a set of their own, possibly with an inscription of some kind

 

[ottafish]

What is it you need exactly?
The end of the air ram tube or the inside from the nosecone?
I have a set of L&R Gen2 if this helps in any way..

 

[rubbersidedown]

@ottafish to the rescue. BOOM. That didn't take long. Thanks 'otta.
he's making these ram air extended scoop kinda velocity stack deals.

Hopefully he'll chime in and ask you for exactly what he needs. Thx Bro,
Rubb.

 

[BigBlu07]

What is it you need exactly?
The end of the air ram tube or the inside from the nosecone?
I have a set of L&R Gen2 if this helps in any way..

View attachment 1628089View attachment 1628090

I need a template of the duct from the front of the nose cone in to the where the metal grate is position

If you can get an accurate sketch of the shape and size of the opening of the nose port and a measurement of depth to the mesh that would be good, if your confused this pic might help

where that red ring sits is what need a drawing of

 

[BigBlu07]

I need a template of the duct from the front of the nose cone in to the where the metal grate is positionView attachment 1628092
If you can get an accurate sketch of the shape and size of the opening of the nose port and a measurement of depth to the mesh that would be good, if your confused this pic might helpView attachment 1628093 where that red ring sits is what need a drawing of

Not the actual black duct, the fairing port.
If you can sketch that port shape onto a 5mm grip sheet like this

That will be awsome

 

[ottafish]

Ahh. ok. Now I understand..

Lemme go play after work tonight and see what I can do..

 

[BigBlu07]

Ahh. ok. Now I understand..

Lemme go play after work tonight and see what I can do..

Much appreciated bro

 

[ottafish]

Now, my bike is back together.. Pity I didn't know about this a week or so ago.
I've done the below, but don't have the graph paper as it's back in the office. If you need trace from inside, I can't help at this stage..
I can trace the below onto graph paper if it's what you want?

 

[BigBlu07]

Now, my bike is back together.. Pity I didn't know about this a week or so ago.
I've done the below, but don't have the graph paper as it's back in the office. If you need trace from inside, I can't help at this stage..
I can trace the below onto graph paper if it's what you want?

View attachment 1628107View attachment 1628108

If you could add a reference measurement of 5mm x 5mm into a picture of the template that should suffice, also try and keep the camera square when you snap a shot. Thanks bro, there will be a set for you when its ready

 

[Amode]

Hey doods... @BigBlu07 is fabricating some parts for the nose cone on Gen I & Gen II Busa's. I'll take my nose off if I have to but am hoping somebody out there has theirs off for whatever reason and can trace out a couple shapes for us. Mostly for BigBlu, he's the designer,fabricator...I'm along more in a janitorial/custodian type capacity.
Anyway...both Gen I and II air intake shapes is what we are after.
Check out progress here: click here
Cool idea,
Cool equipment,
Cool guy.
Help us out if ya can...thoughts,ideas...View attachment 1628078 Thanks bigtime,
Rubb.

 

[Amode]

Hey doods... @BigBlu07 is fabricating some parts for the nose cone on Gen I & Gen II Busa's. I'll take my nose off if I have to but am hoping somebody out there has theirs off for whatever reason and can trace out a couple shapes for us. Mostly for BigBlu, he's the designer,fabricator...I'm along more in a janitorial/custodian type capacity.
Anyway...both Gen I and II air intake shapes is what we are after.
Check out progress here: click here
Cool idea,
Cool equipment,
Cool guy.
Help us out if ya can...thoughts,ideas...View attachment 1628078 Thanks bigtime,
Rubb.

Call me i have some parts.
Chuck 415 370 6680