need a map

[bubba_zenetti]

i need a map for a mr turbo kit running 6 or 7 psi. rajay 301ff40 and a pc3 usb (this is the catch, i have maps for the pc2 for when the kit was originally made in 2000) does anyone have a good baseline map they can help me with? i will ship you a 12 pack of yoru favorite beer in return

 

[Vspec]

Not a Mr turbo as I do not know what injectors you run

But I do have a map from mine

UK built but Holeshot Racing running a modified MD04 turbo

Mine uses 8 injectors with a USB PC for the standard injectors and a stand alone MAF programmed ECU for the other 4 injectors

Sp the map I have is for the USB PC conected to the standard injectors

It has been set up a little rich for low boost of around 10psi

If this helps let me know I can email it over so you can compare to you PC2 maps

Best regards Alan

 

[runeight]

PM email addy. I'll send you an RCC map.

Been up for 25 hours and getting ready to crash so don't delay.

r8

 

[Professor]

If the PCII map is correct for you application, you should be able to copy the fuel changes into a blank PCIII map. You need both apps loaded. I can convert it if needed.

 

[thepushercg]

heres the ghetto base and one glentc made for me

 

[thepushercg]

another one

 

[bubba_zenetti]

If the PCII map is correct for you application, you should be able to copy the fuel changes into a blank PCIII map. You need both apps loaded.  I can convert it if needed.

i was thinking i would do that, however, that is a lot of typing

i don't know how well other maps will work considering the mr turbo system using an old rajay spools a lot slower so boost may be a bit lower in some areas. that and the rate of fuel pressure rise may also be different.

however, i do want to see a bunch of maps so i can do some comparisons and see if i notice any trends in the mappings so i myself can develop my own baseline map to tweak.

shinysideup@comcast.net

that is my e mail address. you guys are all very helpful and everything is much appreciated.

 

[bubba_zenetti]

a little bit more info, i am running stock injectors and stock compression for now. all i am trying to do at the moment is recreate an old kit (mr turbo stage 1 kit) and ditch the weak links in the kit (fmu, wastegate, fuel pump and scav pump) so i just need a good baseline map to get teh engine going so i can make a few runs and see where it needs to go.

 

[cdhoroho]

a little bit more info, i am running stock injectors and stock compression for now. all i am trying to do at the moment is recreate an old kit (mr turbo stage 1 kit) and ditch the weak links in the kit (fmu, wastegate, fuel pump and scav pump) so i just need a good baseline map to get teh engine going so i can make a few runs and see where it needs to go.

My first upgrade would be secondaries

 

[MET]

Use the maqp you have for the PC 2 to be safe and convert it to PC3