Need some help

[bigbadboy]

need some help from some of you more knowledge ppl. i was wondering if both master cylinder set ups from an K7 1K is like a direct swap for the K8 busa. reason i ask is because i'm installing a triple tree in which i need more clearance. i will post up pics as soon as i get everything fixed and installed back on the bike. thanks in advance

 

[bigbadboy]

bump for some help

 

[wharthog3]

You're talking about the clutch and front brake cylinders to clarify?

 

[bigbadboy]

yea

 

[99'busa]

why does your new tree not work?

 

[bigbadboy]

no because i replaced the triple tree with another that replaces both the top and bottom stock tree. so the one i bought is just one complete piece but it positions the handle bars further up to clear the forks so they can slide through. the stock bulky square masters are hitting the top small panel that goes around the top of the speedo. the temp fix is to remove the piece but i want a better fix then that.

 

[BA BUSA]

need some help from some of you more knowledge ppl. i was wondering if both master cylinder set ups from an K7 1K is like a direct swap for the K8 busa. reason i ask is because i'm installing a triple tree in which i need more clearance. i will post up pics as soon as i get everything fixed and installed back on the bike. thanks in advance

Masters are different.

 

[bigbadboy]

Masters are different.

yea i know they are smaller, compact and out of the way. i just need to know if the whole lever system and master will bolt on to the busa

 

[bigbadboy]

bump