Gixx1300R
Registered
New Billet Kickstand for the Busa
- Thread starter Gixx1300R
- Start date
OB_Fast_Eddie
Registered
Pricey, but certainly a nice piece!! 
I can see my friends now...
"YOU PAID WHAT FOR A KICKSTAND?!?!"
[This message has been edited by Fast_Eddie (edited 01 August 2000).]
I can see my friends now...
"YOU PAID WHAT FOR A KICKSTAND?!?!"
[This message has been edited by Fast_Eddie (edited 01 August 2000).]
OB_c_rod2000
Registered
what exactly happens when you slam your bike with the whole kickstand thing? it seems to me it would probably be less of angle so as not to tip over.
G
Guest
if we get enough people interested i could have my machinest produce them for probably less money i already purchased a stock stand for this idea
OB_WARBIRD
Registered
C_ROD, when you slam your bike the kick stand wont go down. It hits the ground before it can swing all the way out. On my dragbike we used to put a 2 by 4 under the frame right under where the kickstand bolts to it.
OB_c_rod2000
Registered
warbird? is their a limit of "slam" before this takes place? i dont see some of the zx9s or 600s with diff. kickstands.
G
Guest
3" will get you a shorter stand 2" stock works fine
OB_superbusa
Registered
I lowered my busa in the front about 1", and the rear 3", did a kick stand mod and had no trouble what so ever getting her to stand at an angle. It actually leans more at an angle than it came at stock height and no stand mod.
IF THIS DOESN'T TOTALLY SUCK!!
I can't believe that I had the idea about a totally ajusting kick stand about 2 months ago, had drawn prints out for measurements, but shut the process down after worring about of stress and stability of the stand when 2 people might be sitting on the bike at a parked position. I'm going to re-introduce my creational idea to the machines soon. ( Nothing like seeing your own idea on someone elses "web site" shelf.)
Any takers?
IF THIS DOESN'T TOTALLY SUCK!!
I can't believe that I had the idea about a totally ajusting kick stand about 2 months ago, had drawn prints out for measurements, but shut the process down after worring about of stress and stability of the stand when 2 people might be sitting on the bike at a parked position. I'm going to re-introduce my creational idea to the machines soon. ( Nothing like seeing your own idea on someone elses "web site" shelf.)
Any takers?
G
Guest
Just like the carbon mirrors, I'll have to have one of these.
Motorhead should have been first with this and eventually someone will make those ramair sealers too.
I realize he's asss deep in his own turbo project but there's a lot of us patiently waiting day after day after day.
Motorhead should have been first with this and eventually someone will make those ramair sealers too.
I realize he's asss deep in his own turbo project but there's a lot of us patiently waiting day after day after day.
Similar threads
