My TL was wrecked last year, happened across a Busa...
This site has been quite helpful!
Stats:
2000 Canada model Black / Grey
~14,000 km
Mods (some PO, some me):
K&N, PCII, Yosh RS3's, dyno sheet from PO 157HP / 97 ftlbs
New 208's
Changed all the fluids, new battery, new chain, re-oiled K&N.
Kickstand mod (this is a MUST DO folks!)
Double bubble, Silverstars, LED front turns, clear rear lens & LED brake lights and integrated signals, trimmed rear flap and plate relocated, not too crazy about the 2nd Look seat (wll trade someone for stock one), cut hump plate to hold 18 oz diet coke!
To do:
Aim headlights, PAIR valve mod or remove, check / read plugs & PC2 map (might be a bit rich), replace minor missing hardware, tune suspension, raise rear a bit, keep burning glaze off rear brake. Give it a good clean / polish. Heated grips!
<!--EDIT|mzilla
Reason for Edit: None given...|1145558978 -->
This site has been quite helpful!
Stats:
2000 Canada model Black / Grey
~14,000 km
Mods (some PO, some me):
K&N, PCII, Yosh RS3's, dyno sheet from PO 157HP / 97 ftlbs
New 208's
Changed all the fluids, new battery, new chain, re-oiled K&N.
Kickstand mod (this is a MUST DO folks!)
Double bubble, Silverstars, LED front turns, clear rear lens & LED brake lights and integrated signals, trimmed rear flap and plate relocated, not too crazy about the 2nd Look seat (wll trade someone for stock one), cut hump plate to hold 18 oz diet coke!

To do:
Aim headlights, PAIR valve mod or remove, check / read plugs & PC2 map (might be a bit rich), replace minor missing hardware, tune suspension, raise rear a bit, keep burning glaze off rear brake. Give it a good clean / polish. Heated grips!
<!--EDIT|mzilla
Reason for Edit: None given...|1145558978 -->