New owner

Boulderite

Registered
2D1B9A4C-416F-488F-B38C-894C36024D58.jpeg
 
No tune yet ,but need to look into seeing what my options are. I do have some slight decel popping. Hoping a simple ecu flash may correct.
You can probably get rid of the decel popping by doing the "marble mod" . If you look it up on here just make sure u follow the directions for the gen2 or you'll block the wrong hose. With brocks exhaust they send u a thin vinyl type vacuum plug that works better then the marble and I'm sure u can get those at any auto parts store.
 
You can probably get rid of the decel popping by doing the "marble mod" . If you look it up on here just make sure u follow the directions for the gen2 or you'll block the wrong hose. With brocks exhaust they send u a thin vinyl type vacuum plug that works better then the marble and I'm sure u can get those at any auto parts store.
+1
Installing the block-off plates is pretty straightforward. Rated 2/5 on the Busa DIY Install scale
 
Decel popping will not likely go away . Quiet normal on most bikes with aftermarket exhaust systems . It happens on stock exhaust too , but one does not hear it due to double wall headers , and Euro 4 / 5 cans make it not noticed .
Fyi putting the grab bar back on will make rear stand application / use ten times easier for chain service or storage parking
 
Back
Top