NEW PCII

[OB_busagsx1300r]

Ok i have a new pcll but i have my map set at 5,5-5 by a yosh box. how can i get it back to the stock settings so i can install the pcll? thanks in advance. eric

 

[OB_jeffw]

You need to use a yosh box again to set it to zero. You could use the pc2 and map your bike, however the numbers you enter will be a lot higher than normal. (other peoples maps won't come close).

 

[Gixx1300R]

I heard that you must turn the ignition on and then disconnect the battery but dont quote me on that.Are you going to Dyno your bike Saturday Morning?

[This message has been edited by Gixxer1300R (edited 17 August 2000).]

 

[Guest]

You can do it all by laptop, use the cable supplied by them.
Go back to zero map before you install the new one. Or you actually can use nick's method which will take the settings back to stock.
For more detailed help, you have to ask bob.
ramair1@flash.net

 

[OB_busagsx1300r]

thanks omega ill email him now, yea lets try and get there arond 9-9:30. im going to install it tonight. i hope if all goes well thanks again omega. when we gonna hook up? eric