Nitrous A-Z Question

[sccrvettel82]

I have a 2005 Busa with nothing done but Viper Cans.

I am looking to add a little more power without getting too crazy. I was thinking somewhere between 40-60 hp dry shot.

I need to know:

1. What all parts do I need from A-Z to perform the install (First time
setting this up on a bike)?

2. Where is the best place to pick up a kit?

3. How much can the stock motor take without pushing it?

4. What type of 1/4 mile gains can be expected?


Thank you in advance for your advice, I appreciate it.

 

[TURBO1320]

i can set you up with a kit, 8.7 at about 166MPH bolt on swing arm extensions and shinko tire, Ran 8.8 at 166 on stock motor GSXR 1000, 64in wheel base and 40 shot .www.1320straightliners.com

 

[chevelle]

1) at the bare minimum you will need a pc,or some other method to add fuel when spraying
you will need a bottle,solinoid,fittings,lines,jet(s)
arm and activation switches,nozzle(s) or elbows

2)lots of choices,
http://prosites-spencercycle.homestead.com/DryN2OKit.html
http://www.dynotunenitrous.com/store....uct=141  
and plenty of others

3) ten people will give you ten different answers on that one,i run a 60 shot on my 05
4) rider skill and chasis set up as well as how much and how soon you start spraying will have a big effect on et reduction