nitrous kit

[07vigorblue]

Does anybody have a dry nitrous kit for sale

 

[dadofthree]

What are you looking for ???


BUMP

 

[StrtRac3r]

I might still have a 10lb bottle layin around somewhere

 

[07vigorblue]

I might still have a 10lb bottle layin around somewhere

ya let me fit that under the hump on the busa lol

 

[07vigorblue]

What are you looking for ???


BUMP

a kit for the busa 45 shot

 

[07vigorblue]

I just picked up a ZEX kit off ebay with an extra hump with tiger racing under hump kit for $150 shipped

 

[fiend]

Nice find! Hell just the hump with the tiger bottle bracket is worth that


Sent from my iPhone using Tapatalk

 

[07vigorblue]

not my colr hump but it will be for sale when it comes in

 

[Gixx1300R]

I have a Gear base Nitrous controller for sale.

 

[07vigorblue]

I was looking at getting the harness from boost by smith would yours be better

 

[RR_Norbit]

I might still have a 10lb bottle layin around somewhere

do you still have it?

 

[karnage]

I would do a wet kit.Dont ever want to run lean with nitrous, ever and make sure to run a fuel pressure gauge as well.

 

[07vigorblue]

I would do a wet kit.Dont ever want to run lean with nitrous, ever and make sure to run a fuel pressure gauge as well.

not a big deal i know plenty of guys running dry its all in the tune and Ryan Schnitz is my tuner but good idea on the fuel press. gauge. where can i get one and where would i put it.

 

[dane789]

Yes, I have a used dry nitrous kit I would sell. 2lb bottle with swingarm mounting bracket, solenoid, stainless feeder line, spray nozzle with a 40hp jet/orifice that mounts in your factory Hayabusa air box.

You would still need your power command set up with a nitrous tune. Then just put 12volts to the solenoid and GO !!!!!

Dan @ 847-323-8186

 

[Gixx1300R]

I have a used Nitrous controller that lets you select which gear you start spraying and it richens the injectors when u spray.

 

[07vigorblue]

Yes, I have a used dry nitrous kit I would sell. 2lb bottle with swingarm mounting bracket, solenoid, stainless feeder line, spray nozzle with a 40hp jet/orifice that mounts in your factory Hayabusa air box.

You would still need your power command set up with a nitrous tune. Then just put 12volts to the solenoid and GO !!!!!

Dan @ 847-323-8186

what are you wanting for the whole kit