i need to knwo what i need to put a noz kit on bike the add for system says this is the add for the info on it
This COLD FUSION NITROUS SYSTEM dry kit will add up to an additional 50HP to your bike. This motorcycle Dry kit uses your bikes EFI air temp sensor to meter the air temp so the computer will add the additional fuel needed to make the extra HP! By passing the cool nitrous charge past the Air Temperature sensor in the intake track, we can trick the bikes EFI system into adding the additional fuel you need to make some serious power! As you can see from the picture of the time slip, the dry kit can get you into the 8 second ¼ mile times!!! FOR THIS KIT TO WORK YOU MUST HAVE A AIR TEMP SENSOR OR POWER COMANDER TO ADD FUEL. Consult your factory manual to make sure you have a "Air Temperature" sensor in your intake (most EFI bike do). This kit Comes with the 1.25LB bottle and bracket. Comes complete with instructions on how to use your Horn or starter button for nitrous activation making it a clean installation. The DUAL NOZZLE system allows the user to install the inlet any way they want. Single or dual inlet intakes, its all in the kit! What’s in the box: •1.25LB Nitrous Bottle with high flow valve & fitting •Powder coated bottle bracket with mounting hardware •3AN braided stainless hose 2 feet long (connects bottle to solenoid) •High Flow 200HP CFN nitrous Oxide solenoid •Solenoid mounting bracket with hardware •Twin mounting nozzles with mounts for dual inlet intakes •High Pressure High Temp Teflon Poly Tubing (connects solenoid to nozzles) •"T" fitting and compression fittings •5 nitrous jets 20-30-40HP •Complete electrical kit with switches, wire, connectors and a complete manual showing how to wire your horn or starter button as the activation switch. •FREE COLD FUSION NITROUS SHIRT. PLEASE TELL US WHAT SIZE YOU NEED! We have a complete line of nitrous oxide parts and kits. Feel free to call us with your questions or credit card orders.
ok does this sound real and really what should i get to use it efi sensor or pmc3
This COLD FUSION NITROUS SYSTEM dry kit will add up to an additional 50HP to your bike. This motorcycle Dry kit uses your bikes EFI air temp sensor to meter the air temp so the computer will add the additional fuel needed to make the extra HP! By passing the cool nitrous charge past the Air Temperature sensor in the intake track, we can trick the bikes EFI system into adding the additional fuel you need to make some serious power! As you can see from the picture of the time slip, the dry kit can get you into the 8 second ¼ mile times!!! FOR THIS KIT TO WORK YOU MUST HAVE A AIR TEMP SENSOR OR POWER COMANDER TO ADD FUEL. Consult your factory manual to make sure you have a "Air Temperature" sensor in your intake (most EFI bike do). This kit Comes with the 1.25LB bottle and bracket. Comes complete with instructions on how to use your Horn or starter button for nitrous activation making it a clean installation. The DUAL NOZZLE system allows the user to install the inlet any way they want. Single or dual inlet intakes, its all in the kit! What’s in the box: •1.25LB Nitrous Bottle with high flow valve & fitting •Powder coated bottle bracket with mounting hardware •3AN braided stainless hose 2 feet long (connects bottle to solenoid) •High Flow 200HP CFN nitrous Oxide solenoid •Solenoid mounting bracket with hardware •Twin mounting nozzles with mounts for dual inlet intakes •High Pressure High Temp Teflon Poly Tubing (connects solenoid to nozzles) •"T" fitting and compression fittings •5 nitrous jets 20-30-40HP •Complete electrical kit with switches, wire, connectors and a complete manual showing how to wire your horn or starter button as the activation switch. •FREE COLD FUSION NITROUS SHIRT. PLEASE TELL US WHAT SIZE YOU NEED! We have a complete line of nitrous oxide parts and kits. Feel free to call us with your questions or credit card orders.
ok does this sound real and really what should i get to use it efi sensor or pmc3
