Nut for clutch mod

[Blake051300]

Can someone verify for me that the nut to remove the clutch assembly is 30mm. I'm replacing my outer basket and need to go buy the right socket. when I installed the clutch mod I borrowed the socket but don't recall the size.
I'm sure many of you know it by heart. I checked previous posts but didnt get a definitive answer.

 

[Blake051300]

Disregard, I went past sears and just bought the 30mm, brought it home and that was correct.

 

[dmrowe]

I don't remember what size the nut is but I do remember going through h*ll putting the clutch back together and getting it to work. Make sure you pay close attention to the order and assembly of the clutch plates and make sure that the oil pump gear is engaged to the drive gear on the back of the basket when reassembling (I didn't pay attention!). If you don't have a manual you can download one on-line. Now might be a good time to install a high volume oil pump drive gear if you haven't already.

Oil Pump Gear, High Volume, Suzuki Hayabusa