Pacific Northwest

[frisbee]

I've got some car edge molding that I'm using for the trim.  Thanks anyway.  

Car edge molding ?? You will have a seam . This is the grommet that looks like it but is the perfect size . I go tit from a group buy on the board a long time ago . If you change your mind just let me know !

 

[frisbee]

 Lemme know and Ill
bring the pig and pig roaster and we'll do it up.

pig roast!

pig roast!

pig roast!

pig roast!

 

[321CYA]

Man I cant wait for the COOKOUT...

 

[321CYA]

 

[ArmyBusa08]

Did you let EPS dyno tune your bike?

 

[BIGSMOOTHH]

Frisbee.....did you just say go tit? Woohooo!!!

 

[GoldenChild]

We could do it at a big race weekend at woodburn if you guys like so you all can go out on the track and make some passes,hang out after it's over drink,party and have a good time,plenty of camping space there also..

 

[BIGSMOOTHH]

We could do it at a big race weekend at woodburn if you guys like so you all can go out on the track and make some passes,hang out after it's over drink,party and have a good time,plenty of camping space there also..

WORKS FOR ME!!!!!!! I have relatives there.

 

[frisbee]

We could do it at a big race weekend at woodburn if you guys like so you all can go out on the track and make some passes,hang out after it's over drink,party and have a good time,plenty of camping space there also..

WORKS FOR ME!!!!!!!   I have relatives there.

Sounds like a plan!!!!!!!!!

 

[TruWrecks]

Car edge molding ?? You will have a seam . This is the grommet that looks like it but is the perfect size . I go tit from a group buy on the board a long time ago . If you change your mind just let me know !

I'll think about that. I need to pick up new lowers for my fairings also. The crack in the right side is almost 6in long, and creeping across the clutch cover area.

 

[TruWrecks]

Did you let EPS dyno tune your bike?

Nope. They just did the Dyno. I'm doing the tuning myself. The AFR is almost perfect right now.

 

[frisbee]

here's the grommets i'm talking about

https://www.hayabusa.org/forums/?act=ST;f=11;t=68743;hl=Punisher

 

[BIGSMOOTHH]

When we riding? Im eager.

 

[ArmyBusa08]

Expect to do a lot of riding in August when I get back!
While I'm thinking about it... who is planning on going to the Oyster Run? I know there are already some guys in my company that are going to go with me. It is on the 4th Sunday of September. My mom lives in Anacortes, and my wife will be driving up with my son and possibly a co-workers son so we can all hang out and enjoy the time there.
Check www.oysterrun.org for more info!

 

[TruWrecks]

here's the grommets i'm talking about

https://www.hayabusa.org/forums/?act=ST;f=11;t=68743;hl=Punisher

Those look great. Okay, you've twisted my arm. How much do you want for them?

 

[frisbee]

here's the grommets i'm talking about

https://www.hayabusa.org/forums/?act=ST;f=11;t=68743;hl=Punisher

Those look great.  Okay, you've twisted my arm.  How much do you want for them?

Nothing ! send me your addy .

 

[frisbee]

Expect to do a lot of riding in August when I get back!
While I'm thinking about it... who is planning on going to the Oyster Run? I know there are already some guys in my company that are going to go with me. It is on the 4th Sunday of September. My mom lives in Anacortes, and my wife will be driving up with my son and possibly a co-workers son so we can all hang out and enjoy the time there.
Check www.oysterrun.org for more info!

I'mn always there ! I hope I can get the day off with my new job !

 

[PDBusa]

Hey guys. Just checking in from the "right coast". Hope you are starting off a good season of riding!

Hey did you guys get MJN some real gloves yet? I mean, you're not letting him ride with you with those Buell gloves on are ya

 

 

[mikeridesbikes]

hope this works

 

[mikeridesbikes]

SWEET! 10 years later I finally figured it out how to post pics lol