PCIII

[GSXRFANN]

I am running slip-ons, and have done the airbox mod, and I am stretched about 2.5inches, have done the clutch mod, and lowered the bike. The motor is ALL stock. I have a PCIII but I am not running it right now. I can't seem to find a good map to work with my combination. Does anyone have a good map for this setup? Am I better off running the stock ECU??
Is it normal to have to adjust the PC as temperature and humidity change? I would like to run the PC if it will help, but I don't understand all of the different numbers and graphs that go along with it!
Any suggestions?



Thanks
Brian

 

[DNGrumpy]

If I had to guess I'd say you are running rich in the lower RPM range and would likely benefir from the PC3. A custom map is always better than a generic one but be prepared to shovel out between $150 and maybe $00 for a good map. And yes humidity and temp can and will affect the way your bike runs... If you are handy with a PC and have the cash then tune the bike for the seasons where you live and swap the maps when the time comes... No, not every ride but say like here in New England riding in March and October when the days are cool and dry and July or August are hot and sticky having two maps makes tons of sense...