plastics

[GravityIsEvil]

so i wanna change out all my plastics i have a 2008 busa and want the all black like the 2011 do they all interchange? will they bolt right on? and what would be the part number there is a couple of them?

 

[GIXERHP]

They will bolt right on!

Have you priced a set yet?

 

[squale147]

id look on ebay first because they will cost you going to suzuki...

 

[red1100cc]

to do a full oem swap would cost a bunch of $$$

you might want to paint it or check out e-bay. ???



to the ORG!

 

[Busa&Coal]

i hear most of the ebay plastics take forever to ship (from china) but for 500 or less dollars. they do have some very sweet looking ones.

 

[Strife]

OEM will cost a bit but you can get a nice chunk back selling your old ones.

 

[bigron]

Ebay is the way to go. The chinese ones will work just as good for a quarter off a price. They do take long to reach though plus members have received fairings with a cracked tail section or a fender but for the price nothing much to complain.

 

[dadofthree]

You can PM Justin at Honda East a sponsor, but I'm thinking 5K or so just for plastics

 

[Jd1300r]

wouldn't it almost be more cost effective to just sell your current and buy the new bike with the color you want?? And you would get a new bike!

 

[squale147]

there were stock oem body work that year and color on ebay going for a fair price...

 

[sanket_420]

wouldn't it almost be more cost effective to just sell your current and buy the new bike with the color you want?? And you would get a new bike!

I agree with JD. GL

 

[Jacobs]

Ebay is the way to go. The chinese ones will work just as good for a quarter off a price.

I completely disagree and unless you've actually seen the $500 full kits, you would understand what I mean.

They do take long to reach though plus members have received fairings with a cracked tail section or a fender but for the price nothing much to complain.

That kind goes against what you said above lol.

 

[Jacobs]

You can PM Justin at Honda East a sponsor, but I'm thinking 5K or so just for plastics

You're a little high on price, but that's pretty close to retail.

I just priced out a complete set including gas tank for someone else and I'll tell the OP the same thing I told him, sit down before you continue reading...


Complete set of painted parts for 2011 Hayabusa
$3,479.65+shipping

 

[sanket_420]

You're a little high on price, but that's pretty close to retail.

I just priced out a complete set including gas tank for someone else and I'll tell the OP the same thing I told him, sit down before you continue reading...


Complete set of painted parts for 2011 Hayabusa
$3,479.65+shipping

I was sitting down but almost fell offa my chair after reading your post Justin.

 

[kromdom]

this seller is down the road from me, would make a good painter set: HAYABUSA 09 FACTORY BODYWORK [[ FULL SET ]]

 

[GravityIsEvil]

well i would sell the old plastics but it has a really custom paint job on it i found a branch in the middle of the road and it got wedged between the exhaust and the right side plastics it bent it back and part flew off messt up the nose cone a little too talked to the painter today to make it match will be 4000 just for paint so im keeping the tank and front fender custom and the tail section is fine and the under cowl is fine too all the other stupp i priced out about 2500


this is what it looked like before too pissed to take after pics

 

[GravityIsEvil]

i have an rcc turbo on it already pushing almost 300 hp

 

[Jacobs]

GravityIsEvil, I sent you a PM back

 

[Blanca BusaLess]

Man all you need is a hard core Maiden fan to buy those from you.

Still if you sold everything for 1000 and bought from Justin you'd have like a new bike for 2500?
That really ain't bad, considering almost half of that is the tank.

Buy all else except the tank and paint yours to match. That's the best way I see to getterdone.

 

[GsxrBots]

^ This!