Power Commander Mod?

[Detroit Busa]

I just bought a 2002 hayabusa........ I love it. But don't know if i should put a power commander on it or not, the bike is stock, performance wise other than yoshi pipes.

1.) will I notice a big difference in the performance of the bike?

2.) if so what are the benifits?

3.) will it harm the bike in anyway or make it unreliable?

4.) Finally what is the best one and where should i buy it from?

Sorry for all the questions.... I am new here, any help would be much appreciated

thanks - Don

 

[Mr Bogus]

if it aint broke dont fix it.... really if the bike is an 02 and it runs ok? leave it alone..

 

[BA BUSA]

Not needed for a stock bike.

 

[Detroit Busa]

if it aint broke dont fix it.... really if the bike is an 02 and it runs ok? leave it alone..

should it not run good being a 02? is that to old for this bike...........i bought it from the original owner who babied it.

thanks again

 

[BA BUSA]

should it not run good being a 02? is that to old for this bike...........i bought it from the original owner who babied it.

thanks again

Your bike is 'stock'...a PC is not necessary on a 'stock' bike. The aftermarket cans are NOT a performance upgrade...they just sound better.

 

[Detroit Busa]

theoretically............ what performance upgrades should the bike have first to warrent the use of a power commander?

 

[BA BUSA]

A full exhaust system, air box mod, aftermarket air filter...these are the mods that most people do...and then you need a PC to remap the fuel injection system.

Nitrous or a turbo set up would require one too

 

[BA BUSA]

theoretically............ what performance upgrades should the bike have first to warrent the use of a power commander?

If your bike was not running it's best (many stock bikes run too lean) then you would benefit from a PC, but you would need a custom dyno tune. Just putting on A PC and downloading a generic map would not do much good. And you have the cost of the PC plus about $250 for the dyno tune.

 

[Detroit Busa]

Thanks everyone........that helped alot

 

[BusaWizard]

 

[Hayabusa2005]

and nice bike!

 

[Rui Gonçalves]

hello guys
Hi have recently got a 07 busa
Last year of 1 gen
And I already got a k&n filter and full exhaust
Now looking to fit a power commander and quick shifter

Can anyone advise me on it

(1) where can I get it
(2) wich one to get ( I.e. Dinnojet pc usb lll , push rod senser + module, etc)

Every little help is appreciated as I'm new here
Thanks guy

 

[Blackmax]

hello guys
Hi have recently got a 07 busa
Last year of 1 gen
And I already got a k&n filter and full exhaust
Now looking to fit a power commander and quick shifter

Can anyone advise me on it

(1) where can I get it
(2) wich one to get ( I.e. Dinnojet pc usb lll , push rod senser + module, etc)

Every little help is appreciated as I'm new here
Thanks guy

No PC3 anymore , Dyno Jet only sells PC5 now , If you have or know of someone with a bad PC3 they will give you a price reduction with trade in of old or bad unit

 

[Dscahill]

If you're looking for a little bit more umph, just get the ECU flashed and be done.

-D

 

[PADEROLIS]

I got my PC3 off of eBay for $125. I also had my ECU flashed and the bike has been dyno tuned.

 

[Rui Gonçalves]

first of all, thanks everyone for the help much appreciated

Now. I'm not sure what to do really
I just want a bit more power and a quick shifter
I've been looking for 2hand pc3 on eBay, but then I will need a qs extension module + rod sensor right?
And then I will need dyno tune and Ecu flash ???
Or...
Should I just get a hm or dynojet standalone qs and Ecu flash?

Also I'm in uk and pretty much everything comes from the states.