Putting a intake cam

[mikev7]

What kind of power gains will this yield? Will the engine suffer from overheating?

 

[POSR]

Troll

 

[onedownfiveup]

Depends on the bike and where you degree the cams in at.

I'd say 5hp +/- a few.

I don't see why your bike would run any hotter, well hot enough for you to notice a change.

 

[roadthing]

Are you sure you want to change your overlap?

 

[onedownfiveup]

Are you sure you want to change your overlap?

It's up to you.

 

[mikev7]

What are the downsides of changing the overlap?

 

[mikev7]

I saw a place that sells stock factory intake cams for like 200 or so dollas. A set of after market can cost 1000 dollas.

 

[roadthing]

Are you sure you want to change your overlap?

It's up to you.

Not me, brother. I wouldn't do it.

Personally, I'd spring for some Webs, or another custom grind cam set.

 

[johnnycrash]

Buy a Web 378 for intake and then throw your old intake on exhaust with some Carpenter 60# springs. Works great - tons of people have done it for years with no probs. That's what I'm running in my 1397.

 

[GoldenChild]

Buy a Web 378 for intake and then throw your old intake on exhaust with some Carpenter 60# springs.  Works great - tons of people have done it for years with no probs.  That's what I'm running in my 1397.

GOOD SETUP AND IF CASH STRAPPED DO DUAL INTAKE CAM HAVE GAINED 7HP ON DYNO AND WE KEEP MOST PARTS IN STOCK TO DO SWAP.

503-663-3278

 

[Revlis]

Moved to appropriate forum.

 

[Jay]

Here is where you get it;     New Cam    This is a brand new intake with the adjustable cam sprocket installed to run as an exhaust. There is also a single cam sprocket offered on that page to put on your intake cam.

Jay

 

[mikev7]

Buy a Web 378 for intake and then throw your old intake on exhaust with some Carpenter 60# springs. Works great - tons of people have done it for years with no probs. That's what I'm running in my 1397.

GOOD SETUP AND IF CASH STRAPPED DO DUAL INTAKE CAM HAVE GAINED 7HP ON DYNO AND WE KEEP MOST PARTS IN STOCK TO DO SWAP.

503-663-3278

Does it push all the power up top? I want to keep my current power curve. I dont like mods that move the power band around a little to produce more engine rpm power.

 

[mikev7]

Whats up with changing the overlap??