Question about Exhaust install

[SHADiGUY1]

any tricks into getting the oem headers off there in there like a mother F'er unless im missing something removed all 8 Torx And the one down below by the belley area damn things wont move.

 

[GoldenChild]

Wiggle them a bit and they will twist down and out.

 

[Aquaman]

I told you....SawzAll

 

[SHADiGUY1]

hahaha ther off brendan pair valve off heheh getting rewady to go back in. had to disconnect left side oil cooler line it was getting hung up soon as i did that right out

 

[cougar19]

Don't forget to cover the inside of the rad with a piece of cardboard to protect it befor installing new pipes.

 

[SHADiGUY1]

yah i just moved radiator forward no issues with pipes easy install.

 

[BigBSBusa]

Sounds like you got it!

 

[scoop08]

Still use the card board on the radiator when you torque the bolts so the torque wrench does not tap the fins and bend them.

 

[BusaWizard]

 

[BIKE DUDE]

I unbolted my rad. and oil cooler and zip tied them forward when I did my pipe. I also removed the horn to give a little more room. Didn't take off the oil line though.