Hello Gen II folk....
Was wondering if someone would be kind enough to take a measuring tape to their radiator mounting tabs from outside to outside. Need to replace my gen I radiator and wondering if a conversion is possible. The gen I is 11.5 inches from outside to outside. That is from mounting tab to mounting tab on the outside, but with no radiator on. Just from the points coming off the frame.
Or if anyone has this info if they could share it. Thanks yallll
Was wondering if someone would be kind enough to take a measuring tape to their radiator mounting tabs from outside to outside. Need to replace my gen I radiator and wondering if a conversion is possible. The gen I is 11.5 inches from outside to outside. That is from mounting tab to mounting tab on the outside, but with no radiator on. Just from the points coming off the frame.
Or if anyone has this info if they could share it. Thanks yallll
You will need to get Hoses. The lower left hose is an 1-1/2 short and the small on that runs from the back of the block at thermostate to radiator is also jsut short ( I re-ran that one around to the right side vs. the left, and it reaches fine now. THe radiator it self will MOUNT right up...exactly like the GenIs........not sure about at the oil cooler ( dotn have one anymore to know )
