I like my setup, which can be viewed at labusa tonight. I left about one inch of fender and sculpted the outer edges so they flow smoothly from the tailsection. Then mounted very high quality sealed marker lights for cars in the outer edges of the 1 inch of fender. They are about an inch wide and 2 1/2 inches long and sit flush. They are clear with yellow bulbs. You can see them clearly from directly behind the bike which is something you wont be able to do if you put them inside the holes in the tail. Last I molded my plate to fit around the fender perfectly. And drilled thru the center of the 1 inch of fender left. Used the little reflectors with wingnuts to mount the plate, they came in blue. Tell me what you think after seeing it tonight.
