Ok, I am looking to use a 260 in the rear. However, I obviously think I need some sort of wide tire kit. I don't need a fancy one with chrome plating or anything. I just need a rear swingarm that fits a 260. Where can I get one and about how much would it cost? (Or can i just modify a stock one?)
Rear Tire Fitment
- Thread starter frook
- Start date
idolan2005
Registered
Ok I think you mean one of these sizes 240/300/360. Each will require an aftermarket swingarm. Since this is your first post lets ask a few questions?
Do you ride now?
DO you own a busa? If yes PICS please
Are you aware the wider the rear the worse the handling?
From what i have seen a 200 will fit on a stock swingarm but might rub on some chains.. if you want a big tire there are tons of companies just look around or in Superbike or TWO magazine.
Oh and welcome to the board
Do you ride now?
DO you own a busa? If yes PICS please
Are you aware the wider the rear the worse the handling?
From what i have seen a 200 will fit on a stock swingarm but might rub on some chains.. if you want a big tire there are tons of companies just look around or in Superbike or TWO magazine.
Oh and welcome to the board
C&S Customs...That is all.
If you mount it on the stock wheel it will actually have a smaller contact patch than the 190 and a 180 on the same wheel will give you a little larger patch.
Fat tires do look good. I've seen car tire kits too
1) What size tire could I use with this swingarm: 8" Over Swingarm
2) I have heard about a car tire kit. Tell me some about them and where to get one.
2) I have heard about a car tire kit. Tell me some about them and where to get one.
idolan2005
Registered
frook..that is extended but not wider across. max on that is probably 200 like stock. C&S was mentioned and they have amazing stuff if your looking for that.
this is a swingarm for a 240 rear, they just get wider from here.
View attachment 1066444
this is a swingarm for a 240 rear, they just get wider from here.
View attachment 1066444
Similar threads
