Hey all, I just installed Soupy's 1 inch risers on the scooter. They feel great and look pretty good for the practicality of them. But when I installed them, I noticed that the fast idle wire is a little tight against the other wires when I turn the handle bars all the way to the left. (Which is how I always keep it when on the kickstand.) Is it possible to unbolt the cable from the left hand grip and just reroute the wire behind the other two wires that it's pulling on? I don't think I need to reroute the whole thing under the tank or anything that drastic. Any suggestions would help. Thanks.
Rerouting Fast Idle adjuster.
- Thread starter Fredyp33
- Start date
Yes from the handle bar you can unbolt it.. Thats where I unbolted mine from and then installed it with the new routing.. what ever routing works for your taste.. you have to take the control apart and you'll see how its attached.
Sorry hope this helps..
Sorry hope this helps..
Yep very similar.. Clutch cable similar as well..
The instructions with my 1 1/2" risers from deadhead stated to simply cut the bracket that holds the cable. I just unlock my steering and turn it straight to crank the bike. You might notice the front brake handle hitting the windscreen as well when turned hard left. Neither is an issue for me just something to be aware of.
