Risers and links???

[money mike]

Hey guys, thinkin about throwin risers and lowering links on the bike when i repaint...
Is this pretty easy, doesn't look hard at all, just wondering, thanks

 

[twotonevert]

Not hard at all. Just take your time. You should be able to install them both with simple tools in about an hour.

 

[money mike]

thanks bro

 

[twotonevert]

If you need help, post up when you do it. The only problem you may have is how high the risers are. If you go 3/4 up or so, you may have to re-route your fast idle cable so it does not rev your bike when you turn the bars. The links are easy to install, easier if you have a rear stand, but I have done mine on the side stand. We are here to help you if you get stumped.

 

[m_ridgeway]

just be sure you have friend or a way to support the bike by yourself.

 

[money mike]

thanks alot guys, i very rarely have good info to distribute, so i kinda feel like this site is one sided, but i always appreciate the help that you guys give... ya'll have helped me out numerous times!!!

 

[09GraySilverBusa]

Probably 2 of the simplest and quickest MOD's you can do.

 

[twotonevert]

thanks alot guys, i very rarely have good info to distribute, so i kinda feel like this site is one sided, but i always appreciate the help that you guys give... ya'll have helped me out numerous times!!!

Its what we are here for, to help each other.

 

[dadofthree]

You don't have to but it's easier with a floor jack and if you remove the exhaust cans if you have the factory set up anyway.

 

[suzuka1980]

Risers is good!!