rob t

rob t

Registered
my o2 busa has 10k on it without a problem.and has been riddin like its a 600.now im thinking about a full exhaust.but dont want to remap or do pair valve or pc. could i pull this cheap mod off or am i looking for trouble!!you know burning valves or flat spots, or bike just running bad. bike seems to run alittle rich stock im thinking muzzy hmmmm.
 
If you do not want to do Map and PC leave alone. You don't need to do the pair valve with a good tune. If you go with pipes you need to tune or you are throwing away your investment. If you are going to do that look for a BMC airfilter and some cans from someone who is moving up. It will get you a little increase. Or just change the gearing to a 16 in front that will give you some real pop.
 
I ran into back firing with the full RS3 exhaust. The PAIR mod is cheap and if your new exhaust is back firing, this should cure the issue. The install is fairly easy as well...

Cloud
 
yep....don't go full until you have enough to do the map as well. Since you're doing the map, you may as well do the sprocket change, airbox mod and PAIR mod.
 
no probs, T....
wink.gif
 
Back
Top