Scorpio SR-i500 install pics

[Haywood]

I finished my install last week, with the exception of the "anti-hijack"/ignition cutout (call it what you will) option.  I am very happy with the unit itself but I noticed nobody posted any pics of their installation (at least I couldn't find any).  So, I am posting a couple here.  

I have not decided whether I will actually complete the anti-hijack module connection or not.  I am concerned about a malfunction while riding.  If anyone has any thoughts on this, please feel free to let me know.

I spoke with Greg at Aritronix last week about the anti-hijack connection and he suggested that there is a 2-wire connector under the seat with a black and a black-white wire connection, and that I should tap into the black-white.  To test this, I unplugged the connector shown in the picture and voila, the FI light comes on and the bike won't start.  I BELIEVE this is the connection to tap into, then.  Given my placement of the module, I will have to lengthen the factory leads from the module itself should I decide to go ahead with the connection.  In fact, I may enhance the connection and use male/female connectors so I can fairly easily bypass this module in the event of a malfunction.

I apologise in advance for my poor photographic abilities.. I'm a lover, not a photographer!

 

[Haywood]

one more.. oh ya, if you don't like my spelling... tuff! :-))

 

[Rich]

I had some pics of up of mine, I will put some up when I get home. I ran the anti hijack (kill box) into the orange/white tracer wire (on the right harness plug, while sitting on the bike) and it works. I also have a vortex kill switch that goes into the same wire up front for the strip. That is the wire that runs in to the kill/run switch. I mounted mine a little different. I put the perimeter sensor/kill box on the ecu and the main unit on the left side of the tail piece (while sitting on the bike). Looks good. What wire is that, that you hooked the kill box to??