Short levers for the Brembo RCS Cosa Corta Master Cylinders

[Flows]

Hey folks,
Any other short half lever options spotted for the RCS CCs besides the TWMs and Brembo?
Assume the half levers on the RCS CCs are interchangeable between clutch and brake sides?

TWM Lever LBD.CCS

Brembo Lever 110A26396

 

[bigoltool]

Brembo also makes the "Low Drag" Variants of the short levers. There are others out there, you just gotta look around. I think ASV makes a variant for the CC also.

You are being redirected...

KOHKEN (KOHKEN DENKA) : Aero Lever 2 for Brembo Corsa Corta Master [KOK-2146S]

 

[ROADTOAD1340]

AEM do a short length in carbon , for both the normal RCS and now the Corsa Corta . The pictured set I had on my RCS on the ex Busa , but , the metal tab included wears down and eventually was not holding position .
I have the standard length on all my bikes nowadays .
Speaking for myself , I know that in an emergency , pulling on the full length lever is quicker to react than the shorter .

 

[bigoltool]

AEM do a short length in carbon , for both the normal RCS and now the Corsa Corta . The pictured set I had on my RCS on the ex Busa , but , the metal tab included wears down and eventually was not holding position .
I have the standard length on all my bikes nowadays .
Speaking for myself , I know that in an emergency , pulling on the full length lever is quicker to react than the shorter .

It is a preference item for certain. When I originally put my CRG levers on I did a Short Brake, Long Clutch lever mainly because of the traffic I was always finding myself in.

 

[sixpack577]

ASV makes shorty levers for Brembo master cylinders now too