Slave Cylinder replacement- HELP!

[short sandrail]

I have a 2 seat mini sandrail, a Short Sandcar with a 1300 CC Suzuki Hayabusa turbo engine. My OEM Suzuki Slave Cylinder for the Clutch is leaking and needs replaced. As it's not in a bike frame,so no Suzuki Vin number. I know the engine is either a 1999 to 2003 or a 2004 - 2007 but not sure which. Any way to tell the engine year by looking at it so I know which slave cylinder to purchase for a replacement? Thanks for any help you can give me. The Suzuki dealers in person or on line have been no help.

 

[ROADTOAD1340]

Hi mate , the '99 -'07 , the Gen 1 model run , all the same slave cylinder . That buggy looks like a lot of fun !!

 

[short sandrail]

Hi mate , the '99 -'07 , the Gen 1 model run , all the same slave cylinder . That buggy looks like a lot of fun !!

 

[short sandrail]

When trying to buy a cylinder they list a Suzuki Hayabusa GSX1300R Clutch Release Cylinder 23160-06B02 OEM for 1999 to 2003 and Suzuki Hayabusa GSX1300R Clutch Release Cylinder 23160-06B11 OEM for 2004 to 2007 That's why I don't know which to buy and use for my engine.

 

[ROADTOAD1340]

How much are they ? Buy the later one or buy both .

 

[short sandrail]

How much are they ? Buy the later one or buy both .

They are about $100 ea

 

[short sandrail]

They are about $100 ea

 

[bigoltool]

Just get a rebuild kit.

 

[short sandrail]

Just get a rebuild kit.

Which kit do I buy,still don't know what engine is in my rail. Suzuki Hayabusa GSX1300R Clutch Release Cylinder 23160-06B02 OEM for 1999 to 2003 and Suzuki Hayabusa GSX1300R Clutch Release Cylinder 23160-06B11 OEM for 2004 to 2007 Kit?

 

[bigoltool]

https://www.ebay.com/itm/Clutch-Sla...n_pCR7JsiGUvKQZX&_trksid=p2489528.m4651.l8656

 

[fallenarch]

can you take the cylinder off the bike and take to a dealer to compare? You have to remove it anyway to replace it.

 

[short sandrail]

Thank all of you for your input,I now have some ideas of how to proceed. If any one out there does think of a way to ID what year my is engine when not mounted it a bike frame I still would like to know what year Hayabusa I am running.

Thanks again!
If any of you are around Silverlake Mich. SANDDUNES at Mears Mich. next summer and see my sandrail flag me down and I would be glad to give you a ride in a 900 lb 300 HP crazy hill climbing sandrail!

 

[Mr Brown]

There will be a VIN number on the motor as well.

 

[Mr Brown]

Are you using a piggybacked factory ecu or standalone?

 

[short sandrail]

Are you using a piggybacked factory ecu or standalone?

A piggybacked factory ecu.

 

[short sandrail]

There will be a VIN number on the motor as well.

Any idea where it located?

 

[Mr Brown]

https://www.hayabusa.org/forum/threads/engine-number-on-gen-ii.182752/#js-post-3131304
Applies to gen 1 as well. You'll need to call Suzuki to get the year.
The ECU should have a part number, either 99-00, 01 is one off, 02-07.