sliders?
- Thread starter gcal
- Start date
G, here's the old post fished up. I hope th shortcut works. Props go to Rhythm, who put up a very good post on this as well as the other members who responded. Hope it helps, bro!
if that didn't work, then go to the second page of "Common Problems" posts and look towards the bottom. It's one of the last posts on the second page. Good luck!
Here's the thread I posted after doing mine. Other members had EXCELLENT input on how to locate the holes in my thread. I also done something else that I didn't see done in the other thread. Lay masking tape on the outside of the fairing if you drill from that side. It can help keep the paint from chipping when the hole saw starts to break through the paint. Pics included of the tape trick.
Yup, it looks like BT comes to the rescue again. Your best bet is to stick with BT, g_calatean. If there's anyone's brains you wanna pick on this board, he's definitely one of them. I got my frame sliders coming in, so I'll be sure to follow this one. Laters!
You are too kind, PB.
You are welcome. Any time.
thanks, BT, but you know you good. One day...I'll get there.
