TommyBusa1
Registered
Recently heard there’s a slight difference if you want dual slip ons. Does anyone know exactly the measurements ? thanks and suggestions etc..
Spec’s For Dual Slip Ons Gen 3
- Thread starter TommyBusa1
- Start date
TommyBusa1
Registered
Thanks mid pipe
45 mm left pipe, 48 mm right pipe.
Most generation three exhaust have to be specific to your year for the diameters to match. Yoshimura makes the little S pipe for their Gen III kits that allows you to adapt generation II muffler slip on kits to the generation III but you need the two small S pipes to change the diameter specifications.
They do sell those individually.
Most generation three exhaust have to be specific to your year for the diameters to match. Yoshimura makes the little S pipe for their Gen III kits that allows you to adapt generation II muffler slip on kits to the generation III but you need the two small S pipes to change the diameter specifications.
They do sell those individually.
Last edited:
TommyBusa1
Registered
Thanks again for your support and time !
scotty - 12
Registered
I checked yoshimura sight and didn’t see the adapter kit. Is it out yet?
Call Don Franzen (909) 628-4722 ext 422. Call Don at Chino Yoshimura, he's my go to guy. Tell him what you're trying to do, and he will set you up with a pair of the S pipes for the generation three kits. And then you can bolt on any generation two slip on kit they have.
They are not on the website as an option, they would prefer you buy the generation three kits. If you like something from the generation two bikes, he has your part numbers for the adapters. Tell him you're a friend of Adams in Las Vegas.
They are not on the website as an option, they would prefer you buy the generation three kits. If you like something from the generation two bikes, he has your part numbers for the adapters. Tell him you're a friend of Adams in Las Vegas.
TommyBusa1
Registered
Thanks brother !!!
Hayabusa_1116
Registered
Just finished with the install of yoshi r77 carbon fiber slipons. Test ride tomorrow.. looks great.. will attach more pictures in the daylight.. next year will get the blackwidow headers..
Rubberrabbit
Registered
Wow! I would kill for these pipes! Very beautiful! But in Germany they are not allowed, they do not meet the Euro 5 standard. A shame! I wouldn't want any other exhaust other than the Yoshi!
I'm with you there, not only do they really look good on the Gen 3, I'm also a fan of Yoshimura pipes above all the others out there...in my mind Yoshimura and Suzuki always went together like (in the day) Kerker and Kawasaki did...
Rubberrabbit
Registered
My friend there I agreed with you. For me it belongs together. I don't understand why Suzuki suddenly teamed up with Akrapovic on Gen 3. I don't find Akra's pipes beautiful, nor do they sound good. And the price? It's absolutely laughable!
Hayabusa_1116
Registered
Some additional pictures in the light from both sides
TommyBusa1
Registered
Looks Great did you remove the DB
TommyBusa1
Registered
Make sure you use matte finish soap and Detailers do not use dawn or high gloss soaps very important
Hayabusa_1116
Registered
Does not come with db killers. They are sold seperate. But the sound is not loud just a bit more throaty
Hayabusa_1116
Registered
I am using wd40 to clean the carbon finish
is it bad?
scotty - 12
Registered
Are the cans for a Gen 3? Or did you use a Gen 2 and adapter?
Similar threads
