What is the best sprocket combination for gen 2 busa I have 500hp and right now I do 7.9s in 1/4 I wants to lower my number any recommendation please. Thanks
What is the best sprocket combination for gen 2 busa I have 500hp and right now I do 7.9s in 1/4 I wants to lower my number any recommendation please. Thanks
I personally don’t have a clue, but wouldn’t the best source of info be the guys that run the turboed Busas at the track?
Or are they hesitant to share their knowledge?
I'm surprised someone who already runs 1/4 miles that low with a 500hp bike is wondering about sprocket combinations. There are a few on here who run 1/4 miles so they can chime in on different combos...
What is the best sprocket combination for gen 2 busa I have 500hp and right now I do 7.9s in 1/4 I wants to lower my number any recommendation please. Thanks
What's your current limiting factor right now? What problems are you having that you can't push through the 7.9s barrier? We would need alot more information to help you out on this one. What is your current bike setup (chassy, how long is your setup, what gearing are you running currently, what clutch (how is that set up), boost control?, how much pressure in your plenum are you seeing at launch, how much boost are you running on the top end, what are your current 60', 330', 1/8 mile, and 1/4 mile times and speeds, what RPM are you shifting at, what RPM are you at crossing the trap at 1/4 mile, what trans are you running)?
Lots of info needed to help someone go faster at those times.
500hp is more than enough to get you well below 7.9s range. Sprocket combination is only a small part of it and it varies greatly depending on setup. I know folks running all sorts of different combinations and running similar times, for example 18/52 and 19/43.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.