Sprockets

[nczukrider]

Has any one ever changed there own sprockets? If so is hard and is there any info on how to?

 

[micbusathens]

simple work if you dont have to change the chain too.Chain needs some special tools.Well:First loosen the rear sprockets holding nuts.Then .you disengage the left piece of your fairing.then take off the plastic tank of the cooland liquid and leave it on the ground.Unscrew the 4 bolts of the sprocket cover and the bolt on the center which holds a sensor and remove the sensor .THen pull out the cover.unscrew the srpockets securing nut.then unscrew counterclockwise the large nut which holds the sprocket by the help of geared engine at 5th and rear brake.Loosen the rear axels nut and loosen the tension of the chain at the maximum.Take the chain off the the front and the rear sprocket .remove the front sprocket..Remove the rear weel and loosen all the way out the nuts and remove the rear sprocket.Its wise to change the elastic cushions behind the sprocket too if theres a free play of the sprocket in the weel.Put on your new sprockets on and reassemble vise versa.

 

[nczukrider]

thanks