stock handlebar switch assembly

magus

Registered
Does anyone have, or can take pics of how everything connects inside the switch housings?

Ie: turnsignal bar,
 
You may want to PM MC Mustang - he just got done installing a new one - he probably has everything you need.
 
Tell me what you need - if you don't need/want the flash to pass, I have an entire housing to send to you. Let me know.
 
Hey MC, what was the issue w/ your turn signal? Seems that mine won't blink either left or right, and just a faint light comes on and then off right away when I do try to turn it on. I know the bulbs aren't the culprit b/c when the alarm goes off I can see the lights flash.

Thanks!
Frank
 
When you hit your alarm, do you actually see the light or just the indicators in the gauge cluster...
There was nothing wrong with mine. I just put in the newer swithes so that I would have the hazards and the flash to pass on my '01. What year is yours?
 
No, I have everything. I just can't remember how all the little levers and what not fit in there.

just need some pics of them open but assembled



thanks
 
Are you having trouble with the fast idle lever? Some poeple do... When I get home, I will take some pics and post them here...
 
MC, I just got an 02, when the alarm is armed, disarmed, the lights actually to flash. The front and rear were modified with led's. I noticed that when I engage the turn signal either left or right, a faint light flashes then just disappears, kinda of like the battery was dying. I am thinking there is something wrong w/ the switch as it doesn't seem to be engaging the signals properly....
 
n/m, i figured out it was something to do w/ the aftermarket flasher relay. i just used the stock flasher relay. i kinda like the faster blinking. It's only 2 to 3x faster than stock.
 
Here are some pics of the housing and switch:

DSC00041__Small_.JPG
 
Pics are from my phone - so sorry about the clearity...

DSC00039__Small_.JPG
 
Back
Top