stock height on Gen II for now.....

[904Busa]

???Need some advice. Planning on installing a 240 Roaring Toyz or Track kit on my bike in the near future. It is stock height now. I don't want to lower the front but am being told the rear needs to be lowered for correct geometry and a good look. Any suggestions are appreciated.

 

[crawler]

If you lower the rear while leaving the front, its only for looks. You'd need lower the front as well to have correct geometry.

 

[dadofthree]

Are you stretching it ? You shouldn't need to do anything if all you're doing is making her wider.

 

[904Busa]

the 240 kit stretches the swing arm 4 over

 

[crawler]

By stretching the bike the angle of the swingarm will raise the tail of the bike. You would need to lower the bike to maintain the stock height. I thought you meant you would need to lower the rear of the bike below stock height for proper geometry.

Also keep in mind that the extra 4" of swingarm provides more leverage on the shock and if you're not a lightweight you may consider revalving the shock and or a heavier spring.