swingarms....

[hayabusa_83]

hey guys i posted a similar topic to this a few months back... but response was poor, im in the market now for a swingarm, im looking at an 0-6" adjustable arm, but not sure what to set it at.... please post as many shot of your bikes as u can and please state the measurements and brand if u dont mind. thanks guys.
ArchetypeBusa~

 

[GoldenChild]

2-6 if you like twisties or go the 6-10 if you wanna hit the strip.i got mine set at 63 inches but with stock tail i would set it about 61".you will need to do a little trim mod on rear fender that i will tell you about if you don't want a tiger tail or a motorhead undertail..lmk and i can get you hooked up.

 

[hayabusa_83]

surely we got pics right guys...c'mon help me out.

 

[bigbooski]

http://www.2forlife-mc.com/temp

0 - 10 Adjustable set to 10 inches.

 

[Bigger-Busa]

10" over with Avon 300 tire, RC marshal 10.5" rim, jack shaft two section chain. I ride it everyday and now have 11,000+ and no rear shock. i made a solid strut and it works pretty good. The origianl shock wa sent out for rebuild and never re-installed it.