tag recocator bracket suggestions

[IRDEATH1340]

looking at the plate relocator that goes on the rear axle between the washer and nut, anyone have issues with these, thinking it wouldn't get tight enough or would spin a little, im 12 over on the swingarm, cant place it on the undertail itll get ripped off

 

[wiesjon]

I got one from sponsor Pasha it and love it. The ONLY problem is it interferes just a little when tightening or loosening the axle nut for chain adjustment. But it looks so much Better I can live with it. Haven't had to do a chain adjustment for quite awhile anyway.

 

[Bezi99]

I have the same one and it looks awesome! Just hold the tag bracket as you're tightening the nut and you'll be ok.

 

[cyclefarm]

Had one on my chopper, got harassed by state trooper, he told me it was illegal in iowa because it was vertical not horizontal, and it was lower than 12" (or so) to ground. So I bought a horizontal one and made sure it was just over 12" from ground. Anyway, be careful.

 

[Dark3]

Got mine from ransom machine. It hangs from the rear peg. Very nice quality. I do have wind drag concerns though. Nice thing is it can be pushed down if needed