Test ride

[pearlbusa]

Okay, I finished changing my sprocket and chain setup to a 16/42. I noticed that it was noisier than the stock setup. Is this normal?? I took it on a test run and I liked the smooth low end get up and go. When I got it on the highway it seemed slower but maybe because i did not get on it all the way. Any way I also noticed that my speedo was off. Ultimately I would like to know for all you guys and gals who have a 16/42 ratio what you noticed when you changed your ratio and what answers you found. Hopefully your knowledge will help me answer any future questions.

 

[Burger King]

Mine isn't any nosier with the 16/42 setup. Make sure you don't have your chain too tight.
You definitely need to add a speed-o-healer so that you can correct your speedo.
IMO the 16/42 combo makes the bike much more lively and fun. The only down side is that
gas mileage suffers.

 

[pearlbusa]

Nope slack is at 1 inch which is in the middle. I agree with you though that the bike is awesome with this setup!!

 

[inthexring]

I have just made the change as well, yeah it gets up and goes now, I need a speedohealer. With the new pipes and the new gears I am loosing lots of range, because I ride it differently now, but I love it!!

 

[ranman]

also with a 16/42 love it you will need a speedo healer the front sprocket is a bit louder but the after market gear doeas not have the rubber on it like the stock one. will never go back