Tether mount on a Gen 1

[White05]

I bought a Boost By Smith tether, but between the choke lever and the clutch master cylinder, I don’t see how to mount it where it says in the left bar. Anybody have pictures? Do I need to remove the lever to make room?

 

[sixpack577]

I bought a Boost By Smith tether, but between the choke lever and the clutch master cylinder, I don’t see how to mount it where it says in the left bar. Anybody have pictures? Do I need to remove the lever to make room?

Yes, you may need to move things to make room on the bar.
You can remove the switch housing, and then drill a small hole in the bar for the switch's plastic location pin to fit into, which will allow you to move the switch housing, if that works better for you personally.
Otherwise, just slide the clutch lever perch and fast-idel lever.

 

[WuzzaCBXRider]

Tether?

 

[sixpack577]

Kill switch safety, looks like an old telephone cord, clips to your belt, pulls out of it's handlebar mounted housing if you come off of the bike.
It's a required safety for alot of racing organizations.

 

[GIXERHP]

Way easier,,,

Killswitchs

 

[White05]

BBS got back to me, it does mount in the right bar. Plenty of room there lol!

 

[Rojo]

New PMR Switches Installed | General Bike Related Topics

Jack at PMR (Pro Machine Racing Components: http://www.pmrcomponents.com/ ) made these two fine billet additions: As always, his pieces are top notch! 1) Kill Switch - Right Side * Wired into the ignition 2) Dual Toggle Switch - Left Side * Toggle One Kills all the lights (Head light, tail...

www.hayabusa.org