Throttle body vacuum line pics

[202mphbusa]

Pics of peoples setups?
I am tired of the tubing spaghetti
I know DAS once made a plate to bolt onto the throttle bodys to combine them all

I am thinking about making a aluminum "log" with like a .312 thru hole lengthwise and 6 small nipples on one side with two 1/8 NPT on the other
6 nipples to the lines off the TB
and the two 1/8 NPT one to the ECU/Map and one to the Blowoff valve

 

[Dnyce]

Not mine but I copied it exactly, 1/4” airline, same as the air shifter line, and 1/4” ptc. Only thing I did different is cap the ends and put the T in the middle, going to the wastegate.

 

[202mphbusa]

Not mine but I copied it exactly, 1/4” airline, same as the air shifter line, and 1/4” ptc. Only thing I did different is cap the ends and put the T in the middle, going to the wastegate.

View attachment 1688747

Push to connect fittings?
how was that done?
must have drilled and tapped throttle bodies?

 

[Dnyce]

Nope. It’s actually a perfect fit on stock nipples

Cut the airline almost flush with the nipple, then push on the ptc fitting. U need 2 90* and 3 T’s

 

[202mphbusa]

HUGE HUGE thank you for the idea
I am going to make a junction log and tee the six together with three outlets

 

[Dnyce]

No problem, looking forward to the pics!

 

[Dustin02]

Damn... Just put another thing on the list for this winter... Thanks @Dnyce... Lol

 

[sixpack577]

Damn... Just put another thing on the list for this winter... Thanks @Dnyce... Lol

lol
I was thinking the same for my '03 Gsxr1k project.
I just replaced the vacuum lines, and don't need it...but that really cleans things up.

 

[Dustin02]

lol
I was thinking the same for my '03 Gsxr1k project.
I just replaced the vacuum lines, and don't need it...but that really cleans things up.

Yeah it does. That will also let me use the push lock fitting for my boost assisted clutch. Chalk another one up... lol

 

[sixpack577]

Yeah it does. That will also let me use the push lock fitting for my boost assisted clutch. Chalk another one up... lol

Ha!
That IS cool...you turbo/sc guys are out of my league

 

[Dustin02]

Ha!
That IS cool...you turbo/sc guys are out of my league

Haha. I just got lucky with finding deals along the way. Got most of the expensive parts for pennies on the dollar.

 

[Dnyce]

Same here, slowly built up the turbo pieces

But yea it’s so simple but looks super clean