Tools for suspension and controls adjustment

[Flows]

Hi folks QQ on tools, this is what I can glean so far:

Bar controls screws: Are these allen or torx? Guessing M6 cap screws with 5mm hex drive?
Gear lever: 10mm
Rear Brake Lever and brake light: 12mm?
Dampening: Flat head normal length
Front Preload: 17mm
Rear Preload: Have a short adjustable C spanner

That is just for the initial set up post pick up.
Any other tools you guys consider essential for short range touring on these for the delivery home?

 

[sixpack577]

Tire guage.
10mm and 12mm wrenches and a 36mm socket or wrench to adjust the chain.
1000 miles with a passenger could require some adjustment.

 

[Flows]

Done, the bar control screws are 5mm Allen.

 

[Ked0607]

Hi folks QQ on tools, this is what I can glean so far:

Bar controls screws: Are these allen or torx? Guessing M6 cap screws with 5mm hex drive?
Gear lever: 10mm
Rear Brake Lever and brake light: 12mm?
Dampening: Flat head normal length
Front Preload: 17mm
Rear Preload: Have a short adjustable C spanner

That is just for the initial set up post pick up.
Any other tools you guys consider essential for short range touring on these for the delivery home?

metric tape measure. roll of tape and a pen

 

[Flows]

Already done thank you.