Has anyone installed these before? If so what thread lube/lock compounds did you use and what torque settings?
For example the factory setting for the front mount A,B,C,D 10mm bolts is (C) 55NM (see page 4 attached) while Probolt recommends a max torque of 38NM lubed for the tapered socket heads. Then what do we do with the Alloy frame inserts? Lubed we are usually dialing back 30 - 50% on torque settings and Ti has a different friction coefficient from steel but Probolt also recommends using factory settings where able. What is best practice here?
For example the factory setting for the front mount A,B,C,D 10mm bolts is (C) 55NM (see page 4 attached) while Probolt recommends a max torque of 38NM lubed for the tapered socket heads. Then what do we do with the Alloy frame inserts? Lubed we are usually dialing back 30 - 50% on torque settings and Ti has a different friction coefficient from steel but Probolt also recommends using factory settings where able. What is best practice here?
Last edited:
