TRE install

NoFearSpear

Stop Looking!
Donating Member
Registered
Got my Busa today,dude gave me a TRE anyone helpme get this bad boy hooked up? im going to try topost some photos of the bike.

ab8e_12_1_.jpg
 
remove the seat, pop up the tank and look on the left side (same side as the kickstand) for a white triangle shaped conection... this should be it.   I don't have one, so someone correct me if I'm wrong
 
(birdaprey @ Apr. 01 2007,19:32) remove the seat, pop up the tank and look on the left side (same side as the kickstand) for a white triangle shaped conection... this should be it.   I don't have one, so someone correct me if I'm wrong
That's it takes less that 10 min. to install.
biggrin.gif
Oh and
post-52-02136-welcome.gif
nice looking bike!!!
beerchug.gif
 
Add about another 10 to 20 minutes for this TRE (GIPro) installation. Gear Indicator attached to speedometer.

post_6_06913_gipro.jpeg
 
30 to 1 hour installation TRE (GIPro). Custom bracket attached to top of dash and gear indicator attached to bracket. I did this install. Love the GIPro, I have the option to turn the TRE on with three mappings 4th, 5th, 6th gear and Off.

GI6.jpeg
 
Sounds easy,,,thankx,,,love the key ring! Think i'll put it on this weekend gotta read up on pc3 maps,install software,ect....im love"n this bike "low to the ground...easy to get down!!!!!!

b138_12_1_.jpg
 
(Shibumi @ Apr. 02 2007,18:05)
post-52-02136-welcome.gif


Time- 30 seconds after you get the seat raised up.
Right. It takes longer to pop the seat and tank than it does to plug the tre in.

--- those tre pics sure look familiar to me!
tounge.gif
 
Back
Top