trouble with

[paulos]

i've just put a custom top yoke on me busa,all went well took about 2 hrs.lol
the trouble is because these are custom made it's made the overall hight of the handle bars alittle higher than the stock busa one's.
the trouble comes when i put my bike on choke and turn the bars full left the choke will move back to the off position,and if i turn the bars full right,the engine revs higher than tick over.
can anybody help solve this problem?

 

[macbusa]

Route the fast-idle cable between the 2 tank bolts. I had to do the same to mine when I installed bar risers.



<!--EDIT|macbusa
Reason for Edit: None given...|1111238296 -->

 

[BA BUSA]

You need to get a bigger hammer

re route the control cables and you should be fine

 

[paulos]

thanx guys i'll give it ago sunday if i need help i'll come back to ya.what should i do with the throttle 1's tho?

 

[BA BUSA]

thanx guys i'll give it ago sunday if i need help i'll come back to ya.what should i do with the throttle 1's tho?

That's what the hammer is for

just kidding....check the adjustment on the throttle cable....it might be too tight. If you can't reposition or adjust them to work, then you might have to get longer ones.