Turbo cams & timing

[auzbusa]

Is it worth putting an intake cam on the exhaust ? If not, does any body adjust cam timing with stock inlet & exhaust. Running a GT28, Hahn port fueller, water/meth cooling, carillo rods, coated pistons. .080 base plate.
Thanks in advance.

 

[busa2001]

stick with stock exhaust cam, i'm running a velocity stage two kit with a T-28, and stock cams set at 105/107 and this works very well for me so far, 105/105 works pretty good also. motor has carillo h-beam rod, JE turbo pistons, .080 spacer plate, carpenter 65lbs, valve springs, arp head studs, ape main bearing studs. i'm also running a aquamist 2c water injection kit.

 

[turbobusa2000]

Stick with stock cams set at 105/105. Intake cam swap is not worth the hassel. If you want more power throw some more boost at it!

 

[OZBooster]

Mark the gt28 exhaust housing will be the choke point in your exhaust side not the cams , changing the cam will probably loose you hp .

If you want to improve things in this area look for a gt2871 with a .82 ex housing