Turbo question aggervating.

[Kounsy]

I had a bov installed and sat i was riding and the bov blew off the plenum. The snap ring was not all the way on and i found that is the reason. I put the bov back on and i had the tank up for alil bit i sat it back dwn and went to start it and it was running rich. seemed like it was flooding. i took it down the road and it pulls hard but and a red light it tries to die. i didnt mess with anything concerning the fuel. it started and idle fine sat and it wont idle for nothing now. any help would be appreciated.

 

[OZBooster]

Probably kinked the return line, pop the tank up and check the routing

 

[Kounsy]

i looked but i didnt see anything.. iono where to begin

 

[atticdog]

vacuum line back on the BOV?

 

[Kounsy]

vacuum line back on the BOV?

checked all of those. they are all in tack. the bov works like its suppose to. i dont know if the tank being up to long would make it flood.

 

[BigRod1300]

vacuum line back on the BOV?

That was my 1st thought.

 

[TurboR]

Where do you have your BOV installed?

 

[jdsbusa]

idle adjustment screw? What RPM is your bike idling at without the fast idle lever engaged?

 

[Kounsy]

i found out the problem and i wouldnt believe it but the spark plugs were the bad guys. soon as i changed them it was smooth as butter!!!!

 

[TurboR]

Glad to know it was something simple!

 

[Kounsy]

well i also found that the map sensor hose was off that explains the flooding. learn something new everyday