Want to go bigger

[slow05]

I have a 60 shot of nitrous on my bike and I would like to put big shot on it like 100 or 120 so does any one have any ideas for pistons,rings,crank ect? Just trying to get a genral idea of what I need to modify to move up to a bigger shot!

 

[Danfaster]

If you go bigger you might want to look at a progressive controller, it would put nitrous in at a gradual rate, like a poor man's turbo. A little easier on parts instead of having the big bang all at once.

 

[Gixx1300R]

I have a 60 shot of nitrous on my bike and I would like to put big shot on it like 100 or 120 so does any one have any ideas for pistons,rings,crank ect? Just trying to get a genral idea of what I need to modify to move up to a bigger shot!

There are many stock motored Busas that have 250hp with Spray and 300hp Turboed. Tuning is the key along with good fuel and colder plugs. 250hp is the max that the stock rods can take when spraying. Nitrous is harder on the motor than Turbos. C16 Fuel,Colder Plugs and retard the timing 8 degrees. Danfaster also ha a good point,get a progrssive controller.