Whats your plan? What you want to buy next for your Gen3 ?

I just installed my new GoPro 11 and quad lock, have’t even tried them out yet, next I want to buy a GPS or radar detector. I’m also looking to have my factory seat modified with a groove.

3AC7EEC0-EF63-4650-A9C0-969F67980268.jpeg
 
Core Moto wheels
Ti fasteners and other light weight pieces
Vortex rearsets with a woolich quick shifter
Trying to get sub 440lbs

I just installed my new GoPro 11 and quad lock, have’t even tried them out yet, next I want to buy a GPS or radar detector. I’m also looking to have my factory seat modified with a groove.

View attachment 1659518
That go pro Mount idea is awesome!
 
Core Moto wheels
Ti fasteners and other light weight pieces
Vortex rearsets with a woolich quick shifter
Trying to get sub 440lbs


That go pro Mount idea is awesome!
Thanks! It was a small challenge but I’m happy with the results, GoPro only makes a curve mount for helmets or flat surface so I bought a 3 pack of flat and I belt sanded a curve to fit the inside of my windscreen. First try of the GoPro will be tomorrow.
 
Thanks! It was a small challenge but I’m happy with the results, GoPro only makes a curve mount for helmets or flat surface so I bought a 3 pack of flat and I belt sanded a curve to fit the inside of my windscreen. First try of the GoPro will be tomorrow.
Good idea!
I might jump on Fusion360 CAD and design some new mounts for different windscreens and 3d print them for you guys
 
I searched the internet high and low and come up with nothing.
Yeah it's quite a bespoke item. We can design our own stuff. I'll punch in the numbers to the computer and pull a rabbit outta my hat. Should be easy enough.
Are there any particular existing GoPro mount designs (angle adjustable pivot arms etc) that you prefer and have photos of? I can adapt or make improvements/changes specific to your wants.
I will need the curve angle or windscreen model and where you plan to mount it.
 
I'm waiting for someone to make a cable clutch conversion and an ABS delete kit. At a min I would like to remove ABS and unlink the rear brake. ABS on the front is quite good and doesn't bother me. I'm also going to pull the accent's off and have them painted a different color and vinyl wrap the plastic tank cover and lower fairings to match the painted accents.
 
Yeah it's quite a bespoke item. We can design our own stuff. I'll punch in the numbers to the computer and pull a rabbit outta my hat. Should be easy enough.
Are there any particular existing GoPro mount designs (angle adjustable pivot arms etc) that you prefer and have photos of? I can adapt or make improvements/changes specific to your wants.
I will need the curve angle or windscreen model and where you plan to mount it.
This is the flat and curved mounts GoPro offers, even aftermarket stuff looks same, I sanded an arch in one of the flat ones and used 3M VHP two sided foam tape to stick to windscreen. Not sure of curvature of the windscreen.

FED645B3-8587-445C-AB59-BF83FECF2B20.png
 
Yeah it's quite a bespoke item. We can design our own stuff. I'll punch in the numbers to the computer and pull a rabbit outta my hat. Should be easy enough.
Are there any particular existing GoPro mount designs (angle adjustable pivot arms etc) that you prefer and have photos of? I can adapt or make improvements/changes specific to your wants.
I will need the curve angle or windscreen model and where you plan to mount it.
I’m good with the one I made for now but it’s nice to know someone can make these if someone else needs one.
 
I'm waiting for someone to make a cable clutch conversion and an ABS delete kit. At a min I would like to remove ABS and unlink the rear brake. ABS on the front is quite good and doesn't bother me. I'm also going to pull the accent's off and have them painted a different color and vinyl wrap the plastic tank cover and lower fairings to match the painted accents.
I have a full set of stock trim pieces I would sell you so you can have them painted and swap on if you want. Full rear cowl included.
 
My core moto wheels went off to anodizing last week, ordered so ti hardware for all the rotating parts to go along with the wheels, sent out rear rotor to get cut, next I'll look to wave front rotors and HM QS. Also will probably switch to Sato rear sets as they seem to be the only ones capable of doing reverse shift pattern
 
Yeah it's quite a bespoke item. We can design our own stuff. I'll punch in the numbers to the computer and pull a rabbit outta my hat. Should be easy enough.
Are there any particular existing GoPro mount designs (angle adjustable pivot arms etc) that you prefer and have photos of? I can adapt or make improvements/changes specific to your wants.
I will need the curve angle or windscreen model and where you plan to mount it.
Anyone looking to mount their dash cam inside their windscreen I recommend it, I took a 160 mile round trip today with my GoPro 11 and the videos were very clear looking through the windscreen, my windscreen is clear. I used 3M VHB tape but be careful and put it where you want it because that tape sticks tight. I posted a photo at the top of this page for reference.
 
My core moto wheels went off to anodizing last week, ordered so ti hardware for all the rotating parts to go along with the wheels, sent out rear rotor to get cut, next I'll look to wave front rotors and HM QS. Also will probably switch to Sato rear sets as they seem to be the only ones capable of doing reverse shift pattern
Who is cutting ypur rear disc? DME?
 
Back
Top